Home > Pumps >

3/4 HP Full Rate Two Speed Motor W/ Timer - Round Flange (B973T, B2973T) 115V
3/4 HP Full Rate Two Speed Motor W/ Timer - Round Flange (B973T, B2973T) 115V


Prime Pool Number: B973T

Part #: B973T
Warranty: 1 YEAR
Alternate Part #s: 177058T, B2973T

Product Description

Premium-Efficiency 2-Speed Pool Motor with Integrated Timer

A. O. Smith’s new 2Green two-speed premium efficiency replacement pump motor with integrated timer packs tremendous value into an easy to- nstall package. Energy efficiency continues to drive the needs of the pool market, from legislation to increased awareness of energy costs and environmental impact. And thanks to the 2Green’s energy efficient high and low speed windings paired with an onboard timer interface, energy consumption can be reduced by as much as 58% over single speed motors. The all-in-one integrated motor and timer means less work for an installer and maximum energy savings for pool and spa owners. A. O. Smith’s 2Green is Title 20 compliant** and best of all, there is no additional wiring required for new construction or retrofit installations!

**California’s Title 20 legislation states that pumps > 1HP (total) must be 2-speed or variable speed, and must have a control to default to low-speed (i.e. timer)

All-in-one design with integrated motorand timer as one unitNo additional wiring required! – other aftermarket
timers require external leads and can be wired
Rain-proof timer enclosureOther aftermarket timers require a secondary enclosure
for outdoor use of the electronics
On-screen motor status updatesUnique feature that provides user feedback (if the shaft
is locked for instance) which can reduce motor failures;
shows the mode (high, low, off) and time remaining
Built-in battery backup protects
programming for 7 full years
No need to replace battery (unlike other timers) or
reset time/settings during a power outage or off-season
Integrated LCD backlight and
adjustable contrast
Ensures the display can easily be viewed in dark, shady, or direct sunlight conditions
Intuitive step-by-step screen instructionsStep-by-step instructions make initial setup and any
future programming changes simple
Manual overrideUser can instantly change motor parameters for cleaning or maintenance without adjusting permanent settings

Product Specifications

Commonly Used On:Hayward Super Pump, Super II Pump & Max-Flo Pumps
HP:75/.10 HP
Speed:2 Speed
RPM:3450/1750 RPM
Amps:12.2/2.2 amp
Service Factor:1.50
Total HP:1.13 HP
Stock #:B2973T
Volts:115 V

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Pumps > Pumps - Pump Motors