|
|
|
 |
| 130,000 BTU HEATER MILLIVLT-LP-Above Ground/Spa Heater |
|
Simple Controls
• Mechanical Thermostat
The
Raypak Millivolt gas heater comes with one mechanical thermostat. This
control allows you to set your pool or spa temperature precisely at
your favorite setting. Just set it, and forget it! Truly simple.
|
|
Wind Resistant
• Built-in Wind Resistant Design
The
Raypak Millivolt has the best outdoor design in the market today. With
over 50 years in designing and building gas heaters, Raypak has put all
that experience into its newest design. No need for fans to combat
drafting problems, the Raypak millivolt was designed for outdoor
installations with its exclusive low profile design. It is so
thoughtfully and carefully designed it actually protects itself from
the things that tend to stifle ordinary pool and spa heaters: falling
leaves, wind, airborne debris, rain, downdrafts, updrafts, sleet, snow,
etc. In fact it is so efficiently designed it ensures uninterrupted
heating performance regardless of all but the most extreme weather
conditions. Built Raypak tough. Built to last.
|
Cabinet
• Smart Design
One
look will tell you that the Raypak Millivolt is different! The look is
contemporary. The design is advanced. And inside and out it's
engineered to last. The attractive forest green and charcoal gray
panels complement the latest pool and spa equipment designs. Raypak's
original "pagoda top" design will keep the heater operating even in
extreme wind conditions and downdrafts. |
• Polytuff Powder Coating
The
Raypak Millivolt has a polyester coated, non-corrosive cabinet that is
more durable than solventborne and waterborne coated metal cabinets.
Every piece of sheet metal that gets powder coated goes through a
7-stage wash system making certain the powder paint has a perfect bond.
Underneath the tough and beautiful finish you will find galvanized
metal that offers superior rust prevention and years of durable service. |
Non-Corrosive Waterways
• Polymer Header
The
Raypak Millivolt incorporates the latest in header design technology.
Raypak's state-of-the-art engineering department utilized the latest in
3-D computer aided design to engineer the part for optimal performance.
Polymer resin headers prevent rust stains from harming your pools surface giving you years of trouble-free swimming pleasure |
• All Copper Fin Tube Heat Exchanger
All Raypak Millivolt gas heaters come standard with integral copper finned tube.
This means that the fin tubing is made from one piece of extruded
copper tube. Since the fins are integral to the tube, maximum heat
transfer is attained. Every Raypak Millivolt has the same robust design
tube bundle that we use in our large gas commercial boilers. |
• Stainless Steel Tube Sheet
Stainless steel tube sheets are used on all Raypak Millivolt heaters that use the Polymer resin headers. This allows for a completely nonferrous waterway leaving your pool truly rust-free. |
• CPVC 2" Water Connections
Standard
with every Raypak Millivolt is a set of 2" slip fit CPVC water
connections to make your installation secure and effortless. |
• Condensation Protection
Standard on all Raypak Millivolt models is Raypak's Unitherm Governor,
which helps reduce condensation from low inlet water temperatures. The
Unitherm Governor automatically regulates the water flow to help keep
the water temperature in the heat exchanger above 105°. Both water
temperature and water flow rate are controlled to eliminate
condensation, sooting, and scale buildup that can shorten heater life.
|
• High Flow Rates
No
need to worry about large pumps or high flow systems. The Raypak
Millivolt comes with an automatic bypass built into the header. You'll
find that the Raypak Millivolt delivers the industry's lowest pressure
drop and highest water flow rate - up to 125 gallons per minute -
exceeding the maximum recommended for 2" plumbing systems. More hot
water moves through faster and more efficiently. |
• Fuel Efficient
Efficient?
You bet. Energy-smart Raypak heaters consistently achieve the highest
efficiency ratings and the Raypak Millivolt is no exception. It exceeds
all federal and state standards.
|
|
Combustion Chamber
• Burner Tray
Every
Raypak Millivolt burner tray is built to last. From the stainless steel
burners to the aluminized metal used in the heat sensitive areas. In
the event that anything should happen to your burners they can be
quickly and easily serviced. One more reason why the Raypak Millivolt
is made to take the work load year after year.
|
• Fire Tile
A ceramic fiber combustion box keeps your Raypak Millivolt running efficiently and keeps the outside jacket cool.
By using this space-age material the heater won't retain residual heat
after it is turned off, allowing it to be installed without the use of
costly metal heat sinks.
|
Quality
• ISO 9001
Raypak
is proud to be a ISO 9001 registered manufacturing plant. One more
reason why Raypak is number one in the heater industry today. |
• End-of-Line Test
Every
Raypak gas pool heater is plumbed and test fired before it is put in
the carton. This ensures that your heater will fire right out of the
box and continue to give you years of trouble-free operation. |
• Quality Checkpoints
The
Raypak assembly process includes 6 final assembly quality checkpoints
that help to ensure that each and every Raypak Millivolt is built correctly, and built to last. |
• CSA Certified
All of Raypaks products are CSA certified. The Raypak Millivolt is tested by CSA to the ANSI Z21.56 standard. |
|
| |
| Base SKU:PR130AMP-N |
| In Stock:Yes |
Regular Price: $1,072.95
On Sale For: $1,025.88 |
|
| |
Quantity:
|
|
|
|
 |
| 130,000 BTU HEATER MILLIVLT-LP-Electronic-Above Ground/Spa Heater |
|
Simple Controls
• Mechanical Thermostat
The
Raypak Millivolt gas heater comes with one mechanical thermostat. This
control allows you to set your pool or spa temperature precisely at
your favorite setting. Just set it, and forget it! Truly simple.
|
|
Wind Resistant
• Built-in Wind Resistant Design
The
Raypak Millivolt has the best outdoor design in the market today. With
over 50 years in designing and building gas heaters, Raypak has put all
that experience into its newest design. No need for fans to combat
drafting problems, the Raypak millivolt was designed for outdoor
installations with its exclusive low profile design. It is so
thoughtfully and carefully designed it actually protects itself from
the things that tend to stifle ordinary pool and spa heaters: falling
leaves, wind, airborne debris, rain, downdrafts, updrafts, sleet, snow,
etc. In fact it is so efficiently designed it ensures uninterrupted
heating performance regardless of all but the most extreme weather
conditions. Built Raypak tough. Built to last.
|
Cabinet
• Smart Design
One
look will tell you that the Raypak Millivolt is different! The look is
contemporary. The design is advanced. And inside and out it's
engineered to last. The attractive forest green and charcoal gray
panels complement the latest pool and spa equipment designs. Raypak's
original "pagoda top" design will keep the heater operating even in
extreme wind conditions and downdrafts. |
• Polytuff Powder Coating
The
Raypak Millivolt has a polyester coated, non-corrosive cabinet that is
more durable than solventborne and waterborne coated metal cabinets.
Every piece of sheet metal that gets powder coated goes through a
7-stage wash system making certain the powder paint has a perfect bond.
Underneath the tough and beautiful finish you will find galvanized
metal that offers superior rust prevention and years of durable service. |
Non-Corrosive Waterways
• Polymer Header
The
Raypak Millivolt incorporates the latest in header design technology.
Raypak's state-of-the-art engineering department utilized the latest in
3-D computer aided design to engineer the part for optimal performance.
Polymer resin headers prevent rust stains from harming your pools surface giving you years of trouble-free swimming pleasure |
• All Copper Fin Tube Heat Exchanger
All Raypak Millivolt gas heaters come standard with integral copper finned tube.
This means that the fin tubing is made from one piece of extruded
copper tube. Since the fins are integral to the tube, maximum heat
transfer is attained. Every Raypak Millivolt has the same robust design
tube bundle that we use in our large gas commercial boilers. |
• Stainless Steel Tube Sheet
Stainless steel tube sheets are used on all Raypak Millivolt heaters that use the Polymer resin headers. This allows for a completely nonferrous waterway leaving your pool truly rust-free. |
• CPVC 2" Water Connections
Standard
with every Raypak Millivolt is a set of 2" slip fit CPVC water
connections to make your installation secure and effortless. |
• Condensation Protection
Standard on all Raypak Millivolt models is Raypak's Unitherm Governor,
which helps reduce condensation from low inlet water temperatures. The
Unitherm Governor automatically regulates the water flow to help keep
the water temperature in the heat exchanger above 105°. Both water
temperature and water flow rate are controlled to eliminate
condensation, sooting, and scale buildup that can shorten heater life.
|
• High Flow Rates
No
need to worry about large pumps or high flow systems. The Raypak
Millivolt comes with an automatic bypass built into the header. You'll
find that the Raypak Millivolt delivers the industry's lowest pressure
drop and highest water flow rate - up to 125 gallons per minute -
exceeding the maximum recommended for 2" plumbing systems. More hot
water moves through faster and more efficiently. |
• Fuel Efficient
Efficient?
You bet. Energy-smart Raypak heaters consistently achieve the highest
efficiency ratings and the Raypak Millivolt is no exception. It exceeds
all federal and state standards.
|
|
Combustion Chamber
• Burner Tray
Every
Raypak Millivolt burner tray is built to last. From the stainless steel
burners to the aluminized metal used in the heat sensitive areas. In
the event that anything should happen to your burners they can be
quickly and easily serviced. One more reason why the Raypak Millivolt
is made to take the work load year after year.
|
• Fire Tile
A ceramic fiber combustion box keeps your Raypak Millivolt running efficiently and keeps the outside jacket cool.
By using this space-age material the heater won't retain residual heat
after it is turned off, allowing it to be installed without the use of
costly metal heat sinks.
|
Quality
• ISO 9001
Raypak
is proud to be a ISO 9001 registered manufacturing plant. One more
reason why Raypak is number one in the heater industry today. |
• End-of-Line Test
Every
Raypak gas pool heater is plumbed and test fired before it is put in
the carton. This ensures that your heater will fire right out of the
box and continue to give you years of trouble-free operation. |
• Quality Checkpoints
The
Raypak assembly process includes 6 final assembly quality checkpoints
that help to ensure that each and every Raypak Millivolt is built correctly, and built to last. |
• CSA Certified
All of Raypaks products are CSA certified. The Raypak Millivolt is tested by CSA to the ANSI Z21.56 standard. |
|
| |
| Base SKU:PR130AEP-N |
| In Stock:Yes |
Regular Price: $1,072.95
On Sale For: $1,025.88 |
|
| |
Quantity:
|
|
|
|
 |
| 130,000 BTU HEATER MILLIVLT-Nat-Above Ground/Spa Heater |
|
Simple Controls
• Mechanical Thermostat
The
Raypak Millivolt gas heater comes with one mechanical thermostat. This
control allows you to set your pool or spa temperature precisely at
your favorite setting. Just set it, and forget it! Truly simple.
|
|
Wind Resistant
• Built-in Wind Resistant Design
The
Raypak Millivolt has the best outdoor design in the market today. With
over 50 years in designing and building gas heaters, Raypak has put all
that experience into its newest design. No need for fans to combat
drafting problems, the Raypak millivolt was designed for outdoor
installations with its exclusive low profile design. It is so
thoughtfully and carefully designed it actually protects itself from
the things that tend to stifle ordinary pool and spa heaters: falling
leaves, wind, airborne debris, rain, downdrafts, updrafts, sleet, snow,
etc. In fact it is so efficiently designed it ensures uninterrupted
heating performance regardless of all but the most extreme weather
conditions. Built Raypak tough. Built to last.
|
Cabinet
• Smart Design
One
look will tell you that the Raypak Millivolt is different! The look is
contemporary. The design is advanced. And inside and out it's
engineered to last. The attractive forest green and charcoal gray
panels complement the latest pool and spa equipment designs. Raypak's
original "pagoda top" design will keep the heater operating even in
extreme wind conditions and downdrafts. |
• Polytuff Powder Coating
The
Raypak Millivolt has a polyester coated, non-corrosive cabinet that is
more durable than solventborne and waterborne coated metal cabinets.
Every piece of sheet metal that gets powder coated goes through a
7-stage wash system making certain the powder paint has a perfect bond.
Underneath the tough and beautiful finish you will find galvanized
metal that offers superior rust prevention and years of durable service. |
Non-Corrosive Waterways
• Polymer Header
The
Raypak Millivolt incorporates the latest in header design technology.
Raypak's state-of-the-art engineering department utilized the latest in
3-D computer aided design to engineer the part for optimal performance.
Polymer resin headers prevent rust stains from harming your pools surface giving you years of trouble-free swimming pleasure |
• All Copper Fin Tube Heat Exchanger
All Raypak Millivolt gas heaters come standard with integral copper finned tube.
This means that the fin tubing is made from one piece of extruded
copper tube. Since the fins are integral to the tube, maximum heat
transfer is attained. Every Raypak Millivolt has the same robust design
tube bundle that we use in our large gas commercial boilers. |
• Stainless Steel Tube Sheet
Stainless steel tube sheets are used on all Raypak Millivolt heaters that use the Polymer resin headers. This allows for a completely nonferrous waterway leaving your pool truly rust-free. |
• CPVC 2" Water Connections
Standard
with every Raypak Millivolt is a set of 2" slip fit CPVC water
connections to make your installation secure and effortless. |
• Condensation Protection
Standard on all Raypak Millivolt models is Raypak's Unitherm Governor,
which helps reduce condensation from low inlet water temperatures. The
Unitherm Governor automatically regulates the water flow to help keep
the water temperature in the heat exchanger above 105°. Both water
temperature and water flow rate are controlled to eliminate
condensation, sooting, and scale buildup that can shorten heater life.
|
• High Flow Rates
No
need to worry about large pumps or high flow systems. The Raypak
Millivolt comes with an automatic bypass built into the header. You'll
find that the Raypak Millivolt delivers the industry's lowest pressure
drop and highest water flow rate - up to 125 gallons per minute -
exceeding the maximum recommended for 2" plumbing systems. More hot
water moves through faster and more efficiently. |
• Fuel Efficient
Efficient?
You bet. Energy-smart Raypak heaters consistently achieve the highest
efficiency ratings and the Raypak Millivolt is no exception. It exceeds
all federal and state standards.
|
|
Combustion Chamber
• Burner Tray
Every
Raypak Millivolt burner tray is built to last. From the stainless steel
burners to the aluminized metal used in the heat sensitive areas. In
the event that anything should happen to your burners they can be
quickly and easily serviced. One more reason why the Raypak Millivolt
is made to take the work load year after year.
|
• Fire Tile
A ceramic fiber combustion box keeps your Raypak Millivolt running efficiently and keeps the outside jacket cool.
By using this space-age material the heater won't retain residual heat
after it is turned off, allowing it to be installed without the use of
costly metal heat sinks.
|
Quality
• ISO 9001
Raypak
is proud to be a ISO 9001 registered manufacturing plant. One more
reason why Raypak is number one in the heater industry today. |
• End-of-Line Test
Every
Raypak gas pool heater is plumbed and test fired before it is put in
the carton. This ensures that your heater will fire right out of the
box and continue to give you years of trouble-free operation. |
• Quality Checkpoints
The
Raypak assembly process includes 6 final assembly quality checkpoints
that help to ensure that each and every Raypak Millivolt is built correctly, and built to last. |
• CSA Certified
All of Raypaks products are CSA certified. The Raypak Millivolt is tested by CSA to the ANSI Z21.56 standard. |
|
| |
| Base SKU:PR130AMN-N |
| In Stock:Yes |
Regular Price: $1,072.95
On Sale For: $1,025.88 |
|
| |
Quantity:
|
|
|
|
 |
| 150,000 BTU HEATER COMP - NAT |
Hayward H-Series Heaters: Heaters for In-Ground Pools and Spas
Available in Millivolt or Electronic Ignition
Specify (N) for Natural or (LP) for Propane when Ordering
|
The Hayward H-Series heater represents the very latest in heating technology for swimming pools and spas. Advanced features include a rust resistant water path with polymer header assembly, a rapid-heat combustion chamber, and a direct spark ignition system for optimum performance and extended product life. Plus, H-Series heaters are simple to install, thanks to its low profile design, light weight, and exclusive CPVC plumbing capability.
|
|
-
Rust resistant water path, with injection-molded polymer header and union lock-nut assembly, provides for extended product life and simple installation.
-
Exclusive CPVC plumbing kit included free with every H-Series heater. Allows for universal heater replacement and maximum plumbing versatility.
-
Specially designed for maximum efficiency even under adverse conditions, such as low water flow and cold incoming water, uniquely sensitive thermal control valve continually monitors and regulates water flow, maintaining water temperature.
-
Constructed of tough, durable Eugenox, a proprietary steel alloy, H-Series burners can be removed individually or as a complete unit for easy maintenance and cleaning.
|
Specifications and Dimensions
|
|
|
Stack Height
|
|
Series
|
BTU Input
|
Heater Width
|
Stack Outlet Diameter
|
DHI
|
HWS
|
|
H400
|
400,000
|
35 1/4"
|
9"
|
31 1/2"
|
19 1/2"
|
|
H350
|
350,000
|
32 1/2"
|
9"
|
31 1/2"
|
17 1/4"
|
|
H300
|
300,000
|
29 3/4"
|
8"
|
30 3/4"
|
17 1/4"
|
|
H250
|
250,000
|
27"
|
7"
|
28 1/4"
|
17 3/4"
|
|
H200
|
200,000
|
24 1/4"
|
7"
|
28 1/4"
|
15 1/4"
|
|
H150
|
150,000
|
21 1/5"
|
6"
|
22 1/4"
|
14"
|
|
Miscellaneous Notes
|
|
10 Year Warranty on Polymer Headers
Thermal 83% Efficiency
|
|
| |
| Base SKU:H150N-N |
| In Stock:Yes |
| Price: $1,181.33 |
|
| |
|
|
|
|
|
| 150,000 BTU HEATER COMP - NAT |
Hayward H-Series Heaters: Heaters for In-Ground Pools and Spas
Available in Millivolt or Electronic Ignition
Specify (N) for Natural or (LP) for Propane when Ordering
|
The Hayward H-Series heater represents the very latest in heating technology for swimming pools and spas. Advanced features include a rust resistant water path with polymer header assembly, a rapid-heat combustion chamber, and a direct spark ignition system for optimum performance and extended product life. Plus, H-Series heaters are simple to install, thanks to its low profile design, light weight, and exclusive CPVC plumbing capability.
|
|
-
Rust resistant water path, with injection-molded polymer header and union lock-nut assembly, provides for extended product life and simple installation.
-
Exclusive CPVC plumbing kit included free with every H-Series heater. Allows for universal heater replacement and maximum plumbing versatility.
-
Specially designed for maximum efficiency even under adverse conditions, such as low water flow and cold incoming water, uniquely sensitive thermal control valve continually monitors and regulates water flow, maintaining water temperature.
-
Constructed of tough, durable Eugenox, a proprietary steel alloy, H-Series burners can be removed individually or as a complete unit for easy maintenance and cleaning.
|
Specifications and Dimensions
|
|
|
Stack Height
|
|
Series
|
BTU Input
|
Heater Width
|
Stack Outlet Diameter
|
DHI
|
HWS
|
|
H400
|
400,000
|
35 1/4"
|
9"
|
31 1/2"
|
19 1/2"
|
|
H350
|
350,000
|
32 1/2"
|
9"
|
31 1/2"
|
17 1/4"
|
|
H300
|
300,000
|
29 3/4"
|
8"
|
30 3/4"
|
17 1/4"
|
|
H250
|
250,000
|
27"
|
7"
|
28 1/4"
|
17 3/4"
|
|
H200
|
200,000
|
24 1/4"
|
7"
|
28 1/4"
|
15 1/4"
|
|
H150
|
150,000
|
21 1/5"
|
6"
|
22 1/4"
|
14"
|
|
Miscellaneous Notes
|
|
10 Year Warranty on Polymer Headers
Thermal 83% Efficiency
|
|
| |
| Base SKU:H150N-N |
| In Stock:Yes |
| Price: $1,181.33 |
|
| |
|
|
|
|
|
|
|
 |
| 199,500 BTU HEATER -Digital |
|
Simple Controls
• Mechanical Thermostat
The Raypak Millivolt gas heater comes with one mechanical thermostat. This control allows you to set your pool or spa temperature precisely at your favorite setting. Just set it, and forget it! Truly simple.
|
|
Wind Resistant
• Built-in Wind Resistant Design
The Raypak Millivolt has the best outdoor design in the market today. With over 50 years in designing and building gas heaters, Raypak has put all that experience into its newest design. No need for fans to combat drafting problems, the Raypak millivolt was designed for outdoor installations with its exclusive low profile design. It is so thoughtfully and carefully designed it actually protects itself from the things that tend to stifle ordinary pool and spa heaters: falling leaves, wind, airborne debris, rain, downdrafts, updrafts, sleet, snow, etc. In fact it is so efficiently designed it ensures uninterrupted heating performance regardless of all but the most extreme weather conditions. Built Raypak tough. Built to last.
|
Cabinet
• Smart Design
One look will tell you that the Raypak Millivolt is different! The look is contemporary. The design is advanced. And inside and out it's engineered to last. The attractive forest green and charcoal gray panels complement the latest pool and spa equipment designs. Raypak's original "pagoda top" design will keep the heater operating even in extreme wind conditions and downdrafts. |
• Polytuff Powder Coating
The Raypak Millivolt has a polyester coated, non-corrosive cabinet that is more durable than solventborne and waterborne coated metal cabinets. Every piece of sheet metal that gets powder coated goes through a 7-stage wash system making certain the powder paint has a perfect bond. Underneath the tough and beautiful finish you will find galvanized metal that offers superior rust prevention and years of durable service. |
Non-Corrosive Waterways
• Polymer Header
The Raypak Millivolt incorporates the latest in header design technology. Raypak's state-of-the-art engineering department utilized the latest in 3-D computer aided design to engineer the part for optimal performance. Polymer resin headers prevent rust stains from harming your pools surface giving you years of trouble-free swimming pleasure |
• All Copper Fin Tube Heat Exchanger
All Raypak Millivolt gas heaters come standard with integral copper finned tube. This means that the fin tubing is made from one piece of extruded copper tube. Since the fins are integral to the tube, maximum heat transfer is attained. Every Raypak Millivolt has the same robust design tube bundle that we use in our large gas commercial boilers. |
• Stainless Steel Tube Sheet
Stainless steel tube sheets are used on all Raypak Millivolt heaters that use the Polymer resin headers. This allows for a completely nonferrous waterway leaving your pool truly rust-free. |
• CPVC 2" Water Connections
Standard with every Raypak Millivolt is a set of 2" slip fit CPVC water connections to make your installation secure and effortless. |
• Condensation Protection
Standard on all Raypak Millivolt models is Raypak's Unitherm Governor, which helps reduce condensation from low inlet water temperatures. The Unitherm Governor automatically regulates the water flow to help keep the water temperature in the heat exchanger above 105°. Both water temperature and water flow rate are controlled to eliminate condensation, sooting, and scale buildup that can shorten heater life.
|
• High Flow Rates
No need to worry about large pumps or high flow systems. The Raypak Millivolt comes with an automatic bypass built into the header. You'll find that the Raypak Millivolt delivers the industry's lowest pressure drop and highest water flow rate - up to 125 gallons per minute - exceeding the maximum recommended for 2" plumbing systems. More hot water moves through faster and more efficiently. |
• Fuel Efficient
Efficient? You bet. Energy-smart Raypak heaters consistently achieve the highest efficiency ratings and the Raypak Millivolt is no exception. It exceeds all federal and state standards.
|
|
Combustion Chamber
• Burner Tray
Every Raypak Millivolt burner tray is built to last. From the stainless steel burners to the aluminized metal used in the heat sensitive areas. In the event that anything should happen to your burners they can be quickly and easily serviced. One more reason why the Raypak Millivolt is made to take the work load year after year.
|
• Fire Tile
A ceramic fiber combustion box keeps your Raypak Millivolt running efficiently and keeps the outside jacket cool. By using this space-age material the heater won't retain residual heat after it is turned off, allowing it to be installed without the use of costly metal heat sinks.
|
Quality
• ISO 9001
Raypak is proud to be a ISO 9001 registered manufacturing plant. One more reason why Raypak is number one in the heater industry today. |
• End-of-Line Test
Every Raypak gas pool heater is plumbed and test fired before it is put in the carton. This ensures that your heater will fire right out of the box and continue to give you years of trouble-free operation. |
• Quality Checkpoints
The Raypak assembly process includes 6 final assembly quality checkpoints that help to ensure that each and every Raypak Millivolt is built correctly, and built to last. |
• CSA Certified
All of Raypaks products are CSA certified. The Raypak Millivolt is tested by CSA to the ANSI Z21.56 standard. |
|
| |
| Base SKU:PR206AEN-N |
| In Stock:Yes |
Regular Price: $1,599.84
On Sale For: $1,428.42 |
|
| |
Quantity:
|
|
|
|
 |
| 199,500 BTU HEATER MILLIVLT-NAT |
|
Simple Controls
• Mechanical Thermostat
The
Raypak Millivolt gas heater comes with one mechanical thermostat. This
control allows you to set your pool or spa temperature precisely at
your favorite setting. Just set it, and forget it! Truly simple.
|
|
Wind Resistant
• Built-in Wind Resistant Design
The
Raypak Millivolt has the best outdoor design in the market today. With
over 50 years in designing and building gas heaters, Raypak has put all
that experience into its newest design. No need for fans to combat
drafting problems, the Raypak millivolt was designed for outdoor
installations with its exclusive low profile design. It is so
thoughtfully and carefully designed it actually protects itself from
the things that tend to stifle ordinary pool and spa heaters: falling
leaves, wind, airborne debris, rain, downdrafts, updrafts, sleet, snow,
etc. In fact it is so efficiently designed it ensures uninterrupted
heating performance regardless of all but the most extreme weather
conditions. Built Raypak tough. Built to last.
|
Cabinet
• Smart Design
One
look will tell you that the Raypak Millivolt is different! The look is
contemporary. The design is advanced. And inside and out it's
engineered to last. The attractive forest green and charcoal gray
panels complement the latest pool and spa equipment designs. Raypak's
original "pagoda top" design will keep the heater operating even in
extreme wind conditions and downdrafts. |
• Polytuff Powder Coating
The
Raypak Millivolt has a polyester coated, non-corrosive cabinet that is
more durable than solventborne and waterborne coated metal cabinets.
Every piece of sheet metal that gets powder coated goes through a
7-stage wash system making certain the powder paint has a perfect bond.
Underneath the tough and beautiful finish you will find galvanized
metal that offers superior rust prevention and years of durable service. |
Non-Corrosive Waterways
• Polymer Header
The
Raypak Millivolt incorporates the latest in header design technology.
Raypak's state-of-the-art engineering department utilized the latest in
3-D computer aided design to engineer the part for optimal performance.
Polymer resin headers prevent rust stains from harming your pools surface giving you years of trouble-free swimming pleasure |
• All Copper Fin Tube Heat Exchanger
All Raypak Millivolt gas heaters come standard with integral copper finned tube.
This means that the fin tubing is made from one piece of extruded
copper tube. Since the fins are integral to the tube, maximum heat
transfer is attained. Every Raypak Millivolt has the same robust design
tube bundle that we use in our large gas commercial boilers. |
• Stainless Steel Tube Sheet
Stainless steel tube sheets are used on all Raypak Millivolt heaters that use the Polymer resin headers. This allows for a completely nonferrous waterway leaving your pool truly rust-free. |
• CPVC 2" Water Connections
Standard
with every Raypak Millivolt is a set of 2" slip fit CPVC water
connections to make your installation secure and effortless. |
• Condensation Protection
Standard on all Raypak Millivolt models is Raypak's Unitherm Governor,
which helps reduce condensation from low inlet water temperatures. The
Unitherm Governor automatically regulates the water flow to help keep
the water temperature in the heat exchanger above 105°. Both water
temperature and water flow rate are controlled to eliminate
condensation, sooting, and scale buildup that can shorten heater life.
|
• High Flow Rates
No
need to worry about large pumps or high flow systems. The Raypak
Millivolt comes with an automatic bypass built into the header. You'll
find that the Raypak Millivolt delivers the industry's lowest pressure
drop and highest water flow rate - up to 125 gallons per minute -
exceeding the maximum recommended for 2" plumbing systems. More hot
water moves through faster and more efficiently. |
• Fuel Efficient
Efficient?
You bet. Energy-smart Raypak heaters consistently achieve the highest
efficiency ratings and the Raypak Millivolt is no exception. It exceeds
all federal and state standards.
|
|
Combustion Chamber
• Burner Tray
Every
Raypak Millivolt burner tray is built to last. From the stainless steel
burners to the aluminized metal used in the heat sensitive areas. In
the event that anything should happen to your burners they can be
quickly and easily serviced. One more reason why the Raypak Millivolt
is made to take the work load year after year.
|
• Fire Tile
A ceramic fiber combustion box keeps your Raypak Millivolt running efficiently and keeps the outside jacket cool.
By using this space-age material the heater won't retain residual heat
after it is turned off, allowing it to be installed without the use of
costly metal heat sinks.
|
Quality
• ISO 9001
Raypak
is proud to be a ISO 9001 registered manufacturing plant. One more
reason why Raypak is number one in the heater industry today. |
• End-of-Line Test
Every
Raypak gas pool heater is plumbed and test fired before it is put in
the carton. This ensures that your heater will fire right out of the
box and continue to give you years of trouble-free operation. |
• Quality Checkpoints
The
Raypak assembly process includes 6 final assembly quality checkpoints
that help to ensure that each and every Raypak Millivolt is built correctly, and built to last. |
• CSA Certified
All of Raypaks products are CSA certified. The Raypak Millivolt is tested by CSA to the ANSI Z21.56 standard. |
|
| |
| Base SKU:PR206AMN-N |
| In Stock:Yes |
Regular Price: $1,799.99
On Sale For: $1,390.98 |
|
| |
Quantity:
|
|
|
|
|
| 200,000 BTU HEATER COMP - NAT |
Hayward H-Series Heaters: Heaters for In-Ground Pools and Spas
Available in Millivolt or Electronic Ignition
Specify (N) for Natural or (LP) for Propane when Ordering
|
The Hayward H-Series heater represents the very latest in heating technology for swimming pools and spas. Advanced features include a rust resistant water path with polymer header assembly, a rapid-heat combustion chamber, and a direct spark ignition system for optimum performance and extended product life. Plus, H-Series heaters are simple to install, thanks to its low profile design, light weight, and exclusive CPVC plumbing capability.
|
|
-
Rust resistant water path, with injection-molded polymer header and union lock-nut assembly, provides for extended product life and simple installation.
-
Exclusive CPVC plumbing kit included free with every H-Series heater. Allows for universal heater replacement and maximum plumbing versatility.
-
Specially designed for maximum efficiency even under adverse conditions, such as low water flow and cold incoming water, uniquely sensitive thermal control valve continually monitors and regulates water flow, maintaining water temperature.
-
Constructed of tough, durable Eugenox, a proprietary steel alloy, H-Series burners can be removed individually or as a complete unit for easy maintenance and cleaning.
|
Specifications and Dimensions
|
|
|
Stack Height
|
|
Series
|
BTU Input
|
Heater Width
|
Stack Outlet Diameter
|
DHI
|
HWS
|
|
H400
|
400,000
|
35 1/4"
|
9"
|
31 1/2"
|
19 1/2"
|
|
H350
|
350,000
|
32 1/2"
|
9"
|
31 1/2"
|
17 1/4"
|
|
H300
|
300,000
|
29 3/4"
|
8"
|
30 3/4"
|
17 1/4"
|
|
H250
|
250,000
|
27"
|
7"
|
28 1/4"
|
17 3/4"
|
|
H200
|
200,000
|
24 1/4"
|
7"
|
28 1/4"
|
15 1/4"
|
|
H150
|
150,000
|
21 1/5"
|
6"
|
22 1/4"
|
14"
|
|
Miscellaneous Notes
|
|
10 Year Warranty on Polymer Headers
Thermal 83% Efficiency
|
|
| |
| Base SKU:H200N-N |
| In Stock:Yes |
| Price: $1,379.87 |
|
| |
|
|
|
|
|
| 200,000 BTU HEATER COMP - NAT |
Hayward H-Series Heaters: Heaters for In-Ground Pools and Spas
Available in Millivolt or Electronic Ignition
Specify (N) for Natural or (LP) for Propane when Ordering
|
The Hayward H-Series heater represents the very latest in heating technology for swimming pools and spas. Advanced features include a rust resistant water path with polymer header assembly, a rapid-heat combustion chamber, and a direct spark ignition system for optimum performance and extended product life. Plus, H-Series heaters are simple to install, thanks to its low profile design, light weight, and exclusive CPVC plumbing capability.
|
|
-
Rust resistant water path, with injection-molded polymer header and union lock-nut assembly, provides for extended product life and simple installation.
-
Exclusive CPVC plumbing kit included free with every H-Series heater. Allows for universal heater replacement and maximum plumbing versatility.
-
Specially designed for maximum efficiency even under adverse conditions, such as low water flow and cold incoming water, uniquely sensitive thermal control valve continually monitors and regulates water flow, maintaining water temperature.
-
Constructed of tough, durable Eugenox, a proprietary steel alloy, H-Series burners can be removed individually or as a complete unit for easy maintenance and cleaning.
|
Specifications and Dimensions
|
|
|
Stack Height
|
|
Series
|
BTU Input
|
Heater Width
|
Stack Outlet Diameter
|
DHI
|
HWS
|
|
H400
|
400,000
|
35 1/4"
|
9"
|
31 1/2"
|
19 1/2"
|
|
H350
|
350,000
|
32 1/2"
|
9"
|
31 1/2"
|
17 1/4"
|
|
H300
|
300,000
|
29 3/4"
|
8"
|
30 3/4"
|
17 1/4"
|
|
H250
|
250,000
|
27"
|
7"
|
28 1/4"
|
17 3/4"
|
|
H200
|
200,000
|
24 1/4"
|
7"
|
28 1/4"
|
15 1/4"
|
|
H150
|
150,000
|
21 1/5"
|
6"
|
22 1/4"
|
14"
|
|
Miscellaneous Notes
|
|
10 Year Warranty on Polymer Headers
Thermal 83% Efficiency
|
|
| |
| Base SKU:H200N-N |
| In Stock:Yes |
| Price: $1,379.87 |
|
| |
|
|
|
|
 |
| 200,000 BTU POOL&SPA HEATER-NAT |
Sta-Rite Max-E-Therm Heaters
|
The Max-E-Therm offers you Sta-RiteÆs latest technological advances like rustproof exterior, smart electronics and increased energy efficiency.
Dependability You Can Trust.
The Max-E-Therm heater was designed to outperform all other pool and spa heaters on todayÆs market.á For example, itÆs the first heater to feature a rustproof exterior.á Which means it not only lasts longer in the elements, but itÆs also far more attractive than the large metal units.á And thatÆs just the start:
|
 |
Easy-read digital display.
The weatherproof digital display rotates to six different positions, making it accessible with any plumbing configuration.á To help you read the display on bright days, a pivoting plastic visor filters the light.
Two programmable temperatures.
To accommodate pools with a built-in spa, the Max-E-Therm has two temperature settings displayed in F or Cá The internal safety feature lets you set maximum temperature levels.
Easy hook-up.
Compact and lightweight, the Max-E-Therm connects easily with Sta-Rite pumps and filters or retrofits easily with other systems.
Choice of energy source.
Works with natural gas or propane.á Exhaust venting adapts easily for indoor or outdoor use.
Energy-efficient technology.
PMG combustion technology pre-mixes air and gas for increased energy efficiency and lower operating costs.
Safe ignition.
With its hot surface electronic ignition, you never have to worry about a pilot light blowing out and leaking gas.
Diagnostic lights.
Should a problem arise, the control panel indicator lights tell you whether to service the heater or the system.
Friendly to the environment.
Exceeds all standards for air pollution exhaust.
|
| |
| Base SKU:SR200NA-N |
| In Stock:Yes |
| Price: $1,539.20 |
|
| |
Quantity:
|
|
|
|
|
| 200,000 BTU POOL&SPA HEATER-NAT |
Sta-Rite Max-E-Therm Heaters
|
The Max-E-Therm offers you Sta-RiteÆs latest technological advances like rustproof exterior, smart electronics and increased energy efficiency.
Dependability You Can Trust.
The Max-E-Therm heater was designed to outperform all other pool and spa heaters on todayÆs market.á For example, itÆs the first heater to feature a rustproof exterior.á Which means it not only lasts longer in the elements, but itÆs also far more attractive than the large metal units.á And thatÆs just the start:
|
|
Easy-read digital display.
The weatherproof digital display rotates to six different positions, making it accessible with any plumbing configuration.á To help you read the display on bright days, a pivoting plastic visor filters the light.
Two programmable temperatures.
To accommodate pools with a built-in spa, the Max-E-Therm has two temperature settings displayed in F or Cá The internal safety feature lets you set maximum temperature levels.
Easy hook-up.
Compact and lightweight, the Max-E-Therm connects easily with Sta-Rite pumps and filters or retrofits easily with other systems.
Choice of energy source.
Works with natural gas or propane.á Exhaust venting adapts easily for indoor or outdoor use.
Energy-efficient technology.
PMG combustion technology pre-mixes air and gas for increased energy efficiency and lower operating costs.
Safe ignition.
With its hot surface electronic ignition, you never have to worry about a pilot light blowing out and leaking gas.
Diagnostic lights.
Should a problem arise, the control panel indicator lights tell you whether to service the heater or the system.
Friendly to the environment.
Exceeds all standards for air pollution exhaust.
|
| |
| Base SKU:SR200NA-N |
| In Stock:Yes |
| Price: $1,539.20 |
|
| |
Quantity:
|
|
|
|
 |
| 207,000 BTU HEATER LOW NOX -NAT -CUPRO NICKEL |
|
Simple Controls
• Mechanical Thermostat
The
Raypak Millivolt gas heater comes with one mechanical thermostat. This
control allows you to set your pool or spa temperature precisely at
your favorite setting. Just set it, and forget it! Truly simple.
|
|
Wind Resistant
• Built-in Wind Resistant Design
The
Raypak Millivolt has the best outdoor design in the market today. With
over 50 years in designing and building gas heaters, Raypak has put all
that experience into its newest design. No need for fans to combat
drafting problems, the Raypak millivolt was designed for outdoor
installations with its exclusive low profile design. It is so
thoughtfully and carefully designed it actually protects itself from
the things that tend to stifle ordinary pool and spa heaters: falling
leaves, wind, airborne debris, rain, downdrafts, updrafts, sleet, snow,
etc. In fact it is so efficiently designed it ensures uninterrupted
heating performance regardless of all but the most extreme weather
conditions. Built Raypak tough. Built to last.
|
Cabinet
• Smart Design
One
look will tell you that the Raypak Millivolt is different! The look is
contemporary. The design is advanced. And inside and out it's
engineered to last. The attractive forest green and charcoal gray
panels complement the latest pool and spa equipment designs. Raypak's
original "pagoda top" design will keep the heater operating even in
extreme wind conditions and downdrafts. |
• Polytuff Powder Coating
The
Raypak Millivolt has a polyester coated, non-corrosive cabinet that is
more durable than solventborne and waterborne coated metal cabinets.
Every piece of sheet metal that gets powder coated goes through a
7-stage wash system making certain the powder paint has a perfect bond.
Underneath the tough and beautiful finish you will find galvanized
metal that offers superior rust prevention and years of durable service. |
Non-Corrosive Waterways
• Polymer Header
The
Raypak Millivolt incorporates the latest in header design technology.
Raypak's state-of-the-art engineering department utilized the latest in
3-D computer aided design to engineer the part for optimal performance.
Polymer resin headers prevent rust stains from harming your pools surface giving you years of trouble-free swimming pleasure |
• All Copper Fin Tube Heat Exchanger
All Raypak Millivolt gas heaters come standard with integral copper finned tube.
This means that the fin tubing is made from one piece of extruded
copper tube. Since the fins are integral to the tube, maximum heat
transfer is attained. Every Raypak Millivolt has the same robust design
tube bundle that we use in our large gas commercial boilers. |
• Stainless Steel Tube Sheet
Stainless steel tube sheets are used on all Raypak Millivolt heaters that use the Polymer resin headers. This allows for a completely nonferrous waterway leaving your pool truly rust-free. |
• CPVC 2" Water Connections
Standard
with every Raypak Millivolt is a set of 2" slip fit CPVC water
connections to make your installation secure and effortless. |
• Condensation Protection
Standard on all Raypak Millivolt models is Raypak's Unitherm Governor,
which helps reduce condensation from low inlet water temperatures. The
Unitherm Governor automatically regulates the water flow to help keep
the water temperature in the heat exchanger above 105°. Both water
temperature and water flow rate are controlled to eliminate
condensation, sooting, and scale buildup that can shorten heater life.
|
• High Flow Rates
No
need to worry about large pumps or high flow systems. The Raypak
Millivolt comes with an automatic bypass built into the header. You'll
find that the Raypak Millivolt delivers the industry's lowest pressure
drop and highest water flow rate - up to 125 gallons per minute -
exceeding the maximum recommended for 2" plumbing systems. More hot
water moves through faster and more efficiently. |
• Fuel Efficient
Efficient?
You bet. Energy-smart Raypak heaters consistently achieve the highest
efficiency ratings and the Raypak Millivolt is no exception. It exceeds
all federal and state standards.
|
|
Combustion Chamber
• Burner Tray
Every
Raypak Millivolt burner tray is built to last. From the stainless steel
burners to the aluminized metal used in the heat sensitive areas. In
the event that anything should happen to your burners they can be
quickly and easily serviced. One more reason why the Raypak Millivolt
is made to take the work load year after year.
|
• Fire Tile
A ceramic fiber combustion box keeps your Raypak Millivolt running efficiently and keeps the outside jacket cool.
By using this space-age material the heater won't retain residual heat
after it is turned off, allowing it to be installed without the use of
costly metal heat sinks.
|
Quality
• ISO 9001
Raypak
is proud to be a ISO 9001 registered manufacturing plant. One more
reason why Raypak is number one in the heater industry today. |
• End-of-Line Test
Every
Raypak gas pool heater is plumbed and test fired before it is put in
the carton. This ensures that your heater will fire right out of the
box and continue to give you years of trouble-free operation. |
• Quality Checkpoints
The
Raypak assembly process includes 6 final assembly quality checkpoints
that help to ensure that each and every Raypak Millivolt is built correctly, and built to last. |
• CSA Certified
All of Raypaks products are CSA certified. The Raypak Millivolt is tested by CSA to the ANSI Z21.56 standard. |
|
| |
| Base SKU:RAY010130-N |
| In Stock:Yes |
Regular Price: $1,899.99
On Sale For: $1,700.66 |
|
| |
Quantity:
|
|
|
|
 |
| 207,000 BTU HEATER LOW NOX -NAT -CUPRO NICKEL - ASME |
|
Simple Controls
• Mechanical Thermostat
The
Raypak Millivolt gas heater comes with one mechanical thermostat. This
control allows you to set your pool or spa temperature precisely at
your favorite setting. Just set it, and forget it! Truly simple.
|
|
Wind Resistant
• Built-in Wind Resistant Design
The
Raypak Millivolt has the best outdoor design in the market today. With
over 50 years in designing and building gas heaters, Raypak has put all
that experience into its newest design. No need for fans to combat
drafting problems, the Raypak millivolt was designed for outdoor
installations with its exclusive low profile design. It is so
thoughtfully and carefully designed it actually protects itself from
the things that tend to stifle ordinary pool and spa heaters: falling
leaves, wind, airborne debris, rain, downdrafts, updrafts, sleet, snow,
etc. In fact it is so efficiently designed it ensures uninterrupted
heating performance regardless of all but the most extreme weather
conditions. Built Raypak tough. Built to last.
|
Cabinet
• Smart Design
One
look will tell you that the Raypak Millivolt is different! The look is
contemporary. The design is advanced. And inside and out it's
engineered to last. The attractive forest green and charcoal gray
panels complement the latest pool and spa equipment designs. Raypak's
original "pagoda top" design will keep the heater operating even in
extreme wind conditions and downdrafts. |
• Polytuff Powder Coating
The
Raypak Millivolt has a polyester coated, non-corrosive cabinet that is
more durable than solventborne and waterborne coated metal cabinets.
Every piece of sheet metal that gets powder coated goes through a
7-stage wash system making certain the powder paint has a perfect bond.
Underneath the tough and beautiful finish you will find galvanized
metal that offers superior rust prevention and years of durable service. |
Non-Corrosive Waterways
• Polymer Header
The
Raypak Millivolt incorporates the latest in header design technology.
Raypak's state-of-the-art engineering department utilized the latest in
3-D computer aided design to engineer the part for optimal performance.
Polymer resin headers prevent rust stains from harming your pools surface giving you years of trouble-free swimming pleasure |
• All Copper Fin Tube Heat Exchanger
All Raypak Millivolt gas heaters come standard with integral copper finned tube.
This means that the fin tubing is made from one piece of extruded
copper tube. Since the fins are integral to the tube, maximum heat
transfer is attained. Every Raypak Millivolt has the same robust design
tube bundle that we use in our large gas commercial boilers. |
• Stainless Steel Tube Sheet
Stainless steel tube sheets are used on all Raypak Millivolt heaters that use the Polymer resin headers. This allows for a completely nonferrous waterway leaving your pool truly rust-free. |
• CPVC 2" Water Connections
Standard
with every Raypak Millivolt is a set of 2" slip fit CPVC water
connections to make your installation secure and effortless. |
• Condensation Protection
Standard on all Raypak Millivolt models is Raypak's Unitherm Governor,
which helps reduce condensation from low inlet water temperatures. The
Unitherm Governor automatically regulates the water flow to help keep
the water temperature in the heat exchanger above 105°. Both water
temperature and water flow rate are controlled to eliminate
condensation, sooting, and scale buildup that can shorten heater life.
|
• High Flow Rates
No
need to worry about large pumps or high flow systems. The Raypak
Millivolt comes with an automatic bypass built into the header. You'll
find that the Raypak Millivolt delivers the industry's lowest pressure
drop and highest water flow rate - up to 125 gallons per minute -
exceeding the maximum recommended for 2" plumbing systems. More hot
water moves through faster and more efficiently. |
• Fuel Efficient
Efficient?
You bet. Energy-smart Raypak heaters consistently achieve the highest
efficiency ratings and the Raypak Millivolt is no exception. It exceeds
all federal and state standards.
|
|
Combustion Chamber
• Burner Tray
Every
Raypak Millivolt burner tray is built to last. From the stainless steel
burners to the aluminized metal used in the heat sensitive areas. In
the event that anything should happen to your burners they can be
quickly and easily serviced. One more reason why the Raypak Millivolt
is made to take the work load year after year.
|
• Fire Tile
A ceramic fiber combustion box keeps your Raypak Millivolt running efficiently and keeps the outside jacket cool.
By using this space-age material the heater won't retain residual heat
after it is turned off, allowing it to be installed without the use of
costly metal heat sinks.
|
Quality
• ISO 9001
Raypak
is proud to be a ISO 9001 registered manufacturing plant. One more
reason why Raypak is number one in the heater industry today. |
• End-of-Line Test
Every
Raypak gas pool heater is plumbed and test fired before it is put in
the carton. This ensures that your heater will fire right out of the
box and continue to give you years of trouble-free operation. |
• Quality Checkpoints
The
Raypak assembly process includes 6 final assembly quality checkpoints
that help to ensure that each and every Raypak Millivolt is built correctly, and built to last. |
• CSA Certified
All of Raypaks products are CSA certified. The Raypak Millivolt is tested by CSA to the ANSI Z21.56 standard. |
|
| |
| Base SKU:RAY010227-N |
| In Stock:Yes |
Regular Price: $2,199.88
On Sale For: $1,862.47 |
|
| |
Quantity:
|
|
|
|
|
|
|
 |
| 266,000 BTU HEATER MILLIVLT-NAT |
|
Enjoy your pool......Extend your swim season
Your pool and spa is a long-term investment that you, your family and friends will enjoy year after year. Now, there’s an easier way to enjoy that investment more often, more reliably and more efficiently throughout the year...the Raypak Millivolt pool and spa heater.
Think about being able to use your pool or spa at the perfect comfort level even when Fall arrives...or when the first chill of Winter is felt in the wind...or in the Spring or Summer when evenings can turn chilly in a minute! Helping you get more enjoyment from your pool or spa is the smart idea behind the Raypak Millivolt.
|
|
Technical Data
|
|
Simple Controls
• Mechanical Thermostat
The Raypak Millivolt gas heater comes with one mechanical thermostat. This control allows you to set your pool or spa temperature precisely at your favorite setting. Just set it, and forget it! Truly simple.
|
|
|
Wind Resistant
• Built-in Wind Resistant Design
The Raypak Millivolt has the best outdoor design in the market today. With over 50 years in designing and building gas heaters, Raypak has put all that experience into its newest design. No need for fans to combat drafting problems, the Raypak millivolt was designed for outdoor installations with its exclusive low profile design. It is so thoughtfully and carefully designed it actually protects itself from the things that tend to stifle ordinary pool and spa heaters: falling leaves, wind, airborne debris, rain, downdrafts, updrafts, sleet, snow, etc. In fact it is so efficiently designed it ensures uninterrupted heating performance regardless of all but the most extreme weather conditions. Built Raypak tough. Built to last.
|
|
|
Cabinet
• Smart Design
One look will tell you that the Raypak Millivolt is different! The look is contemporary. The design is advanced. And inside and out it's engineered to last. The attractive forest green and charcoal gray panels complement the latest pool and spa equipment designs. Raypak's original "pagoda top" design will keep the heater operating even in extreme wind conditions and downdrafts. |
|
• Polytuff Powder Coating
The Raypak Millivolt has a polyester coated, non-corrosive cabinet that is more durable than solventborne and waterborne coated metal cabinets. Every piece of sheet metal that gets powder coated goes through a 7-stage wash system making certain the powder paint has a perfect bond. Underneath the tough and beautiful finish you will find galvanized metal that offers superior rust prevention and years of durable service. |
|
Non-Corrosive Waterways
• Polymer Header
The Raypak Millivolt incorporates the latest in header design technology. Raypak's state-of-the-art engineering department utilized the latest in 3-D computer aided design to engineer the part for optimal performance. Polymer resin headers prevent rust stains from harming your pools surface giving you years of trouble-free swimming pleasure |
|
• All Copper Fin Tube Heat Exchanger
All Raypak Millivolt gas heaters come standard with integral copper finned tube. This means that the fin tubing is made from one piece of extruded copper tube. Since the fins are integral to the tube, maximum heat transfer is attained. Every Raypak Millivolt has the same robust design tube bundle that we use in our large gas commercial boilers. |
|
• Stainless Steel Tube Sheet
Stainless steel tube sheets are used on all Raypak Millivolt heaters that use the Polymer resin headers. This allows for a completely nonferrous waterway leaving your pool truly rust-free. |
|
• CPVC 2" Water Connections
Standard with every Raypak Millivolt is a set of 2" slip fit CPVC water connections to make your installation secure and effortless. |
|
• Condensation Protection
Standard on all Raypak Millivolt models is Raypak's Unitherm Governor, which helps reduce condensation from low inlet water temperatures. The Unitherm Governor automatically regulates the water flow to help keep the water temperature in the heat exchanger above 105°. Both water temperature and water flow rate are controlled to eliminate condensation, sooting, and scale buildup that can shorten heater life.
|
|
• High Flow Rates
No need to worry about large pumps or high flow systems. The Raypak Millivolt comes with an automatic bypass built into the header. You'll find that the Raypak Millivolt delivers the industry's lowest pressure drop and highest water flow rate - up to 125 gallons per minute - exceeding the maximum recommended for 2" plumbing systems. More hot water moves through faster and more efficiently. |
|
• Fuel Efficient
Efficient? You bet. Energy-smart Raypak heaters consistently achieve the highest efficiency ratings and the Raypak Millivolt is no exception. It exceeds all federal and state standards.
|
|
|
Combustion Chamber
• Burner Tray
Every Raypak Millivolt burner tray is built to last. From the stainless steel burners to the aluminized metal used in the heat sensitive areas. In the event that anything should happen to your burners they can be quickly and easily serviced. One more reason why the Raypak Millivolt is made to take the work load year after year.
|
|
• Fire Tile
A ceramic fiber combustion box keeps your Raypak Millivolt running efficiently and keeps the outside jacket cool. By using this space-age material the heater won't retain residual heat after it is turned off, allowing it to be installed without the use of costly metal heat sinks.
|
|
Quality
• ISO 9001
Raypak is proud to be a ISO 9001 registered manufacturing plant. One more reason why Raypak is number one in the heater industry today. |
|
• End-of-Line Test
Every Raypak gas pool heater is plumbed and test fired before it is put in the carton. This ensures that your heater will fire right out of the box and continue to give you years of trouble-free operation. |
|
• Quality Checkpoints
The Raypak assembly process includes 6 final assembly quality checkpoints that help to ensure that each and every Raypak Millivolt is built correctly, and built to last. |
|
• CSA Certified
All of Raypaks products are CSA certified. The Raypak Millivolt is tested by CSA to the ANSI Z21.56 standard. |
|
|
| |
| Base SKU:PR266AMN-N |
| In Stock:Yes |
Regular Price: $1,899.99
On Sale For: $1,507.08 |
|
| |
Quantity:
|
|
|
|
 |
| 267,000 BTU CAPRON HEATER LOW NOX -NAT |
|
Simple Controls
• Mechanical Thermostat
The
Raypak Millivolt gas heater comes with one mechanical thermostat. This
control allows you to set your pool or spa temperature precisely at
your favorite setting. Just set it, and forget it! Truly simple.
|
|
Wind Resistant
• Built-in Wind Resistant Design
The
Raypak Millivolt has the best outdoor design in the market today. With
over 50 years in designing and building gas heaters, Raypak has put all
that experience into its newest design. No need for fans to combat
drafting problems, the Raypak millivolt was designed for outdoor
installations with its exclusive low profile design. It is so
thoughtfully and carefully designed it actually protects itself from
the things that tend to stifle ordinary pool and spa heaters: falling
leaves, wind, airborne debris, rain, downdrafts, updrafts, sleet, snow,
etc. In fact it is so efficiently designed it ensures uninterrupted
heating performance regardless of all but the most extreme weather
conditions. Built Raypak tough. Built to last.
|
Cabinet
• Smart Design
One
look will tell you that the Raypak Millivolt is different! The look is
contemporary. The design is advanced. And inside and out it's
engineered to last. The attractive forest green and charcoal gray
panels complement the latest pool and spa equipment designs. Raypak's
original "pagoda top" design will keep the heater operating even in
extreme wind conditions and downdrafts. |
• Polytuff Powder Coating
The
Raypak Millivolt has a polyester coated, non-corrosive cabinet that is
more durable than solventborne and waterborne coated metal cabinets.
Every piece of sheet metal that gets powder coated goes through a
7-stage wash system making certain the powder paint has a perfect bond.
Underneath the tough and beautiful finish you will find galvanized
metal that offers superior rust prevention and years of durable service. |
Non-Corrosive Waterways
• Polymer Header
The
Raypak Millivolt incorporates the latest in header design technology.
Raypak's state-of-the-art engineering department utilized the latest in
3-D computer aided design to engineer the part for optimal performance.
Polymer resin headers prevent rust stains from harming your pools surface giving you years of trouble-free swimming pleasure |
• All Copper Fin Tube Heat Exchanger
All Raypak Millivolt gas heaters come standard with integral copper finned tube.
This means that the fin tubing is made from one piece of extruded
copper tube. Since the fins are integral to the tube, maximum heat
transfer is attained. Every Raypak Millivolt has the same robust design
tube bundle that we use in our large gas commercial boilers. |
• Stainless Steel Tube Sheet
Stainless steel tube sheets are used on all Raypak Millivolt heaters that use the Polymer resin headers. This allows for a completely nonferrous waterway leaving your pool truly rust-free. |
• CPVC 2" Water Connections
Standard
with every Raypak Millivolt is a set of 2" slip fit CPVC water
connections to make your installation secure and effortless. |
• Condensation Protection
Standard on all Raypak Millivolt models is Raypak's Unitherm Governor,
which helps reduce condensation from low inlet water temperatures. The
Unitherm Governor automatically regulates the water flow to help keep
the water temperature in the heat exchanger above 105°. Both water
temperature and water flow rate are controlled to eliminate
condensation, sooting, and scale buildup that can shorten heater life.
|
• High Flow Rates
No
need to worry about large pumps or high flow systems. The Raypak
Millivolt comes with an automatic bypass built into the header. You'll
find that the Raypak Millivolt delivers the industry's lowest pressure
drop and highest water flow rate - up to 125 gallons per minute -
exceeding the maximum recommended for 2" plumbing systems. More hot
water moves through faster and more efficiently. |
• Fuel Efficient
Efficient?
You bet. Energy-smart Raypak heaters consistently achieve the highest
efficiency ratings and the Raypak Millivolt is no exception. It exceeds
all federal and state standards.
|
|
Combustion Chamber
• Burner Tray
Every
Raypak Millivolt burner tray is built to last. From the stainless steel
burners to the aluminized metal used in the heat sensitive areas. In
the event that anything should happen to your burners they can be
quickly and easily serviced. One more reason why the Raypak Millivolt
is made to take the work load year after year.
|
• Fire Tile
A ceramic fiber combustion box keeps your Raypak Millivolt running efficiently and keeps the outside jacket cool.
By using this space-age material the heater won't retain residual heat
after it is turned off, allowing it to be installed without the use of
costly metal heat sinks.
|
Quality
• ISO 9001
Raypak
is proud to be a ISO 9001 registered manufacturing plant. One more
reason why Raypak is number one in the heater industry today. |
• End-of-Line Test
Every
Raypak gas pool heater is plumbed and test fired before it is put in
the carton. This ensures that your heater will fire right out of the
box and continue to give you years of trouble-free operation. |
• Quality Checkpoints
The
Raypak assembly process includes 6 final assembly quality checkpoints
that help to ensure that each and every Raypak Millivolt is built correctly, and built to last. |
• CSA Certified
All of Raypaks products are CSA certified. The Raypak Millivolt is tested by CSA to the ANSI Z21.56 standard. |
|
| |
| Base SKU:RAY009241-N |
| In Stock:Yes |
Regular Price: $1,899.99
On Sale For: $1,770.74 |
|
| |
Quantity:
|
|
|
|
 |
| 267,000 BTU HEATER LOW NOX -NAT -CUPRO NICKEL |
|
Simple Controls
• Mechanical Thermostat
The
Raypak Millivolt gas heater comes with one mechanical thermostat. This
control allows you to set your pool or spa temperature precisely at
your favorite setting. Just set it, and forget it! Truly simple.
|
|
Wind Resistant
• Built-in Wind Resistant Design
The
Raypak Millivolt has the best outdoor design in the market today. With
over 50 years in designing and building gas heaters, Raypak has put all
that experience into its newest design. No need for fans to combat
drafting problems, the Raypak millivolt was designed for outdoor
installations with its exclusive low profile design. It is so
thoughtfully and carefully designed it actually protects itself from
the things that tend to stifle ordinary pool and spa heaters: falling
leaves, wind, airborne debris, rain, downdrafts, updrafts, sleet, snow,
etc. In fact it is so efficiently designed it ensures uninterrupted
heating performance regardless of all but the most extreme weather
conditions. Built Raypak tough. Built to last.
|
Cabinet
• Smart Design
One
look will tell you that the Raypak Millivolt is different! The look is
contemporary. The design is advanced. And inside and out it's
engineered to last. The attractive forest green and charcoal gray
panels complement the latest pool and spa equipment designs. Raypak's
original "pagoda top" design will keep the heater operating even in
extreme wind conditions and downdrafts. |
• Polytuff Powder Coating
The
Raypak Millivolt has a polyester coated, non-corrosive cabinet that is
more durable than solventborne and waterborne coated metal cabinets.
Every piece of sheet metal that gets powder coated goes through a
7-stage wash system making certain the powder paint has a perfect bond.
Underneath the tough and beautiful finish you will find galvanized
metal that offers superior rust prevention and years of durable service. |
Non-Corrosive Waterways
• Polymer Header
The
Raypak Millivolt incorporates the latest in header design technology.
Raypak's state-of-the-art engineering department utilized the latest in
3-D computer aided design to engineer the part for optimal performance.
Polymer resin headers prevent rust stains from harming your pools surface giving you years of trouble-free swimming pleasure |
• All Copper Fin Tube Heat Exchanger
All Raypak Millivolt gas heaters come standard with integral copper finned tube.
This means that the fin tubing is made from one piece of extruded
copper tube. Since the fins are integral to the tube, maximum heat
transfer is attained. Every Raypak Millivolt has the same robust design
tube bundle that we use in our large gas commercial boilers. |
• Stainless Steel Tube Sheet
Stainless steel tube sheets are used on all Raypak Millivolt heaters that use the Polymer resin headers. This allows for a completely nonferrous waterway leaving your pool truly rust-free. |
• CPVC 2" Water Connections
Standard
with every Raypak Millivolt is a set of 2" slip fit CPVC water
connections to make your installation secure and effortless. |
• Condensation Protection
Standard on all Raypak Millivolt models is Raypak's Unitherm Governor,
which helps reduce condensation from low inlet water temperatures. The
Unitherm Governor automatically regulates the water flow to help keep
the water temperature in the heat exchanger above 105°. Both water
temperature and water flow rate are controlled to eliminate
condensation, sooting, and scale buildup that can shorten heater life.
|
• High Flow Rates
No
need to worry about large pumps or high flow systems. The Raypak
Millivolt comes with an automatic bypass built into the header. You'll
find that the Raypak Millivolt delivers the industry's lowest pressure
drop and highest water flow rate - up to 125 gallons per minute -
exceeding the maximum recommended for 2" plumbing systems. More hot
water moves through faster and more efficiently. |
• Fuel Efficient
Efficient?
You bet. Energy-smart Raypak heaters consistently achieve the highest
efficiency ratings and the Raypak Millivolt is no exception. It exceeds
all federal and state standards.
|
|
Combustion Chamber
• Burner Tray
Every
Raypak Millivolt burner tray is built to last. From the stainless steel
burners to the aluminized metal used in the heat sensitive areas. In
the event that anything should happen to your burners they can be
quickly and easily serviced. One more reason why the Raypak Millivolt
is made to take the work load year after year.
|
• Fire Tile
A ceramic fiber combustion box keeps your Raypak Millivolt running efficiently and keeps the outside jacket cool.
By using this space-age material the heater won't retain residual heat
after it is turned off, allowing it to be installed without the use of
costly metal heat sinks.
|
Quality
• ISO 9001
Raypak
is proud to be a ISO 9001 registered manufacturing plant. One more
reason why Raypak is number one in the heater industry today. |
• End-of-Line Test
Every
Raypak gas pool heater is plumbed and test fired before it is put in
the carton. This ensures that your heater will fire right out of the
box and continue to give you years of trouble-free operation. |
• Quality Checkpoints
The
Raypak assembly process includes 6 final assembly quality checkpoints
that help to ensure that each and every Raypak Millivolt is built correctly, and built to last. |
• CSA Certified
All of Raypaks products are CSA certified. The Raypak Millivolt is tested by CSA to the ANSI Z21.56 standard. |
|
| |
| Base SKU:RAY010131-N |
| In Stock:Yes |
Regular Price: $1,999.99
On Sale For: $1,863.75 |
|
| |
Quantity:
|
|
|
|
 |
| 267,000 BTU HEATER LOW NOX -NAT -CUPRO NICKEL - ASME |
|
Simple Controls
• Mechanical Thermostat
The
Raypak Millivolt gas heater comes with one mechanical thermostat. This
control allows you to set your pool or spa temperature precisely at
your favorite setting. Just set it, and forget it! Truly simple.
|
|
Wind Resistant
• Built-in Wind Resistant Design
The
Raypak Millivolt has the best outdoor design in the market today. With
over 50 years in designing and building gas heaters, Raypak has put all
that experience into its newest design. No need for fans to combat
drafting problems, the Raypak millivolt was designed for outdoor
installations with its exclusive low profile design. It is so
thoughtfully and carefully designed it actually protects itself from
the things that tend to stifle ordinary pool and spa heaters: falling
leaves, wind, airborne debris, rain, downdrafts, updrafts, sleet, snow,
etc. In fact it is so efficiently designed it ensures uninterrupted
heating performance regardless of all but the most extreme weather
conditions. Built Raypak tough. Built to last.
|
Cabinet
• Smart Design
One
look will tell you that the Raypak Millivolt is different! The look is
contemporary. The design is advanced. And inside and out it's
engineered to last. The attractive forest green and charcoal gray
panels complement the latest pool and spa equipment designs. Raypak's
original "pagoda top" design will keep the heater operating even in
extreme wind conditions and downdrafts. |
• Polytuff Powder Coating
The
Raypak Millivolt has a polyester coated, non-corrosive cabinet that is
more durable than solventborne and waterborne coated metal cabinets.
Every piece of sheet metal that gets powder coated goes through a
7-stage wash system making certain the powder paint has a perfect bond.
Underneath the tough and beautiful finish you will find galvanized
metal that offers superior rust prevention and years of durable service. |
Non-Corrosive Waterways
• Polymer Header
The
Raypak Millivolt incorporates the latest in header design technology.
Raypak's state-of-the-art engineering department utilized the latest in
3-D computer aided design to engineer the part for optimal performance.
Polymer resin headers prevent rust stains from harming your pools surface giving you years of trouble-free swimming pleasure |
• All Copper Fin Tube Heat Exchanger
All Raypak Millivolt gas heaters come standard with integral copper finned tube.
This means that the fin tubing is made from one piece of extruded
copper tube. Since the fins are integral to the tube, maximum heat
transfer is attained. Every Raypak Millivolt has the same robust design
tube bundle that we use in our large gas commercial boilers. |
• Stainless Steel Tube Sheet
Stainless steel tube sheets are used on all Raypak Millivolt heaters that use the Polymer resin headers. This allows for a completely nonferrous waterway leaving your pool truly rust-free. |
• CPVC 2" Water Connections
Standard
with every Raypak Millivolt is a set of 2" slip fit CPVC water
connections to make your installation secure and effortless. |
• Condensation Protection
Standard on all Raypak Millivolt models is Raypak's Unitherm Governor,
which helps reduce condensation from low inlet water temperatures. The
Unitherm Governor automatically regulates the water flow to help keep
the water temperature in the heat exchanger above 105°. Both water
temperature and water flow rate are controlled to eliminate
condensation, sooting, and scale buildup that can shorten heater life.
|
• High Flow Rates
No
need to worry about large pumps or high flow systems. The Raypak
Millivolt comes with an automatic bypass built into the header. You'll
find that the Raypak Millivolt delivers the industry's lowest pressure
drop and highest water flow rate - up to 125 gallons per minute -
exceeding the maximum recommended for 2" plumbing systems. More hot
water moves through faster and more efficiently. |
• Fuel Efficient
Efficient?
You bet. Energy-smart Raypak heaters consistently achieve the highest
efficiency ratings and the Raypak Millivolt is no exception. It exceeds
all federal and state standards.
|
|
Combustion Chamber
• Burner Tray
Every
Raypak Millivolt burner tray is built to last. From the stainless steel
burners to the aluminized metal used in the heat sensitive areas. In
the event that anything should happen to your burners they can be
quickly and easily serviced. One more reason why the Raypak Millivolt
is made to take the work load year after year.
|
• Fire Tile
A ceramic fiber combustion box keeps your Raypak Millivolt running efficiently and keeps the outside jacket cool.
By using this space-age material the heater won't retain residual heat
after it is turned off, allowing it to be installed without the use of
costly metal heat sinks.
|
Quality
• ISO 9001
Raypak
is proud to be a ISO 9001 registered manufacturing plant. One more
reason why Raypak is number one in the heater industry today. |
• End-of-Line Test
Every
Raypak gas pool heater is plumbed and test fired before it is put in
the carton. This ensures that your heater will fire right out of the
box and continue to give you years of trouble-free operation. |
• Quality Checkpoints
The
Raypak assembly process includes 6 final assembly quality checkpoints
that help to ensure that each and every Raypak Millivolt is built correctly, and built to last. |
• CSA Certified
All of Raypaks products are CSA certified. The Raypak Millivolt is tested by CSA to the ANSI Z21.56 standard. |
|
| |
| Base SKU:RAY010228-N |
| In Stock:Yes |
Regular Price: $2,299.88
On Sale For: $2,025.56 |
|
| |
Quantity:
|
|
|
|
|
|
|
|
| 332,500 BTU HEATER MILLIVLT-NAT |
|
Enjoy your pool......Extend your swim season
Your pool and spa is a long-term investment that you, your family and friends will enjoy year after year. Now, there’s an easier way to enjoy that investment more often, more reliably and more efficiently throughout the year...the Raypak Millivolt pool and spa heater.
Think about being able to use your pool or spa at the perfect comfort level even when Fall arrives...or when the first chill of Winter is felt in the wind...or in the Spring or Summer when evenings can turn chilly in a minute! Helping you get more enjoyment from your pool or spa is the smart idea behind the Raypak Millivolt.
|
|
Technical Data
|
|
Simple Controls
• Mechanical Thermostat
The Raypak Millivolt gas heater comes with one mechanical thermostat. This control allows you to set your pool or spa temperature precisely at your favorite setting. Just set it, and forget it! Truly simple.
|
|
|
Wind Resistant
• Built-in Wind Resistant Design
The Raypak Millivolt has the best outdoor design in the market today. With over 50 years in designing and building gas heaters, Raypak has put all that experience into its newest design. No need for fans to combat drafting problems, the Raypak millivolt was designed for outdoor installations with its exclusive low profile design. It is so thoughtfully and carefully designed it actually protects itself from the things that tend to stifle ordinary pool and spa heaters: falling leaves, wind, airborne debris, rain, downdrafts, updrafts, sleet, snow, etc. In fact it is so efficiently designed it ensures uninterrupted heating performance regardless of all but the most extreme weather conditions. Built Raypak tough. Built to last.
|
|
|
Cabinet
• Smart Design
One look will tell you that the Raypak Millivolt is different! The look is contemporary. The design is advanced. And inside and out it's engineered to last. The attractive forest green and charcoal gray panels complement the latest pool and spa equipment designs. Raypak's original "pagoda top" design will keep the heater operating even in extreme wind conditions and downdrafts. |
|
• Polytuff Powder Coating
The Raypak Millivolt has a polyester coated, non-corrosive cabinet that is more durable than solventborne and waterborne coated metal cabinets. Every piece of sheet metal that gets powder coated goes through a 7-stage wash system making certain the powder paint has a perfect bond. Underneath the tough and beautiful finish you will find galvanized metal that offers superior rust prevention and years of durable service. |
|
Non-Corrosive Waterways
• Polymer Header
The Raypak Millivolt incorporates the latest in header design technology. Raypak's state-of-the-art engineering department utilized the latest in 3-D computer aided design to engineer the part for optimal performance. Polymer resin headers prevent rust stains from harming your pools surface giving you years of trouble-free swimming pleasure |
|
• All Copper Fin Tube Heat Exchanger
All Raypak Millivolt gas heaters come standard with integral copper finned tube. This means that the fin tubing is made from one piece of extruded copper tube. Since the fins are integral to the tube, maximum heat transfer is attained. Every Raypak Millivolt has the same robust design tube bundle that we use in our large gas commercial boilers. |
|
• Stainless Steel Tube Sheet
Stainless steel tube sheets are used on all Raypak Millivolt heaters that use the Polymer resin headers. This allows for a completely nonferrous waterway leaving your pool truly rust-free. |
|
• CPVC 2" Water Connections
Standard with every Raypak Millivolt is a set of 2" slip fit CPVC water connections to make your installation secure and effortless. |
|
• Condensation Protection
Standard on all Raypak Millivolt models is Raypak's Unitherm Governor, which helps reduce condensation from low inlet water temperatures. The Unitherm Governor automatically regulates the water flow to help keep the water temperature in the heat exchanger above 105°. Both water temperature and water flow rate are controlled to eliminate condensation, sooting, and scale buildup that can shorten heater life.
|
|
• High Flow Rates
No need to worry about large pumps or high flow systems. The Raypak Millivolt comes with an automatic bypass built into the header. You'll find that the Raypak Millivolt delivers the industry's lowest pressure drop and highest water flow rate - up to 125 gallons per minute - exceeding the maximum recommended for 2" plumbing systems. More hot water moves through faster and more efficiently. |
|
• Fuel Efficient
Efficient? You bet. Energy-smart Raypak heaters consistently achieve the highest efficiency ratings and the Raypak Millivolt is no exception. It exceeds all federal and state standards.
|
|
|
Combustion Chamber
• Burner Tray
Every Raypak Millivolt burner tray is built to last. From the stainless steel burners to the aluminized metal used in the heat sensitive areas. In the event that anything should happen to your burners they can be quickly and easily serviced. One more reason why the Raypak Millivolt is made to take the work load year after year.
|
|
• Fire Tile
A ceramic fiber combustion box keeps your Raypak Millivolt running efficiently and keeps the outside jacket cool. By using this space-age material the heater won't retain residual heat after it is turned off, allowing it to be installed without the use of costly metal heat sinks.
|
|
Quality
• ISO 9001
Raypak is proud to be a ISO 9001 registered manufacturing plant. One more reason why Raypak is number one in the heater industry today. |
|
• End-of-Line Test
Every Raypak gas pool heater is plumbed and test fired before it is put in the carton. This ensures that your heater will fire right out of the box and continue to give you years of trouble-free operation. |
|
• Quality Checkpoints
The Raypak assembly process includes 6 final assembly quality checkpoints that help to ensure that each and every Raypak Millivolt is built correctly, and built to last. |
|
• CSA Certified
All of Raypaks products are CSA certified. The Raypak Millivolt is tested by CSA to the ANSI Z21.56 standard. |
|
|
| |
| Base SKU:PR336AMN-N |
| In Stock:Yes |
Regular Price: $2,199.99
On Sale For: $1,716.06 |
|
| |
Quantity:
|
|
|
|
|
| 332,500 BTU HEATER -NAT -Digital |
|
Enjoy your pool......Extend your swim season
Your pool and spa is a long-term investment that you, your family and friends will enjoy year after year. Now, there’s an easier way to enjoy that investment more often, more reliably and more efficiently throughout the year...the Raypak Millivolt pool and spa heater.
Think about being able to use your pool or spa at the perfect comfort level even when Fall arrives...or when the first chill of Winter is felt in the wind...or in the Spring or Summer when evenings can turn chilly in a minute! Helping you get more enjoyment from your pool or spa is the smart idea behind the Raypak Millivolt.
|
|
Technical Data
|
|
Simple Controls
• Mechanical Thermostat
The Raypak Millivolt gas heater comes with one mechanical thermostat. This control allows you to set your pool or spa temperature precisely at your favorite setting. Just set it, and forget it! Truly simple.
|
|
|
Wind Resistant
• Built-in Wind Resistant Design
The Raypak Millivolt has the best outdoor design in the market today. With over 50 years in designing and building gas heaters, Raypak has put all that experience into its newest design. No need for fans to combat drafting problems, the Raypak millivolt was designed for outdoor installations with its exclusive low profile design. It is so thoughtfully and carefully designed it actually protects itself from the things that tend to stifle ordinary pool and spa heaters: falling leaves, wind, airborne debris, rain, downdrafts, updrafts, sleet, snow, etc. In fact it is so efficiently designed it ensures uninterrupted heating performance regardless of all but the most extreme weather conditions. Built Raypak tough. Built to last.
|
|
|
Cabinet
• Smart Design
One look will tell you that the Raypak Millivolt is different! The look is contemporary. The design is advanced. And inside and out it's engineered to last. The attractive forest green and charcoal gray panels complement the latest pool and spa equipment designs. Raypak's original "pagoda top" design will keep the heater operating even in extreme wind conditions and downdrafts. |
|
• Polytuff Powder Coating
The Raypak Millivolt has a polyester coated, non-corrosive cabinet that is more durable than solventborne and waterborne coated metal cabinets. Every piece of sheet metal that gets powder coated goes through a 7-stage wash system making certain the powder paint has a perfect bond. Underneath the tough and beautiful finish you will find galvanized metal that offers superior rust prevention and years of durable service. |
|
Non-Corrosive Waterways
• Polymer Header
The Raypak Millivolt incorporates the latest in header design technology. Raypak's state-of-the-art engineering department utilized the latest in 3-D computer aided design to engineer the part for optimal performance. Polymer resin headers prevent rust stains from harming your pools surface giving you years of trouble-free swimming pleasure |
|
• All Copper Fin Tube Heat Exchanger
All Raypak Millivolt gas heaters come standard with integral copper finned tube. This means that the fin tubing is made from one piece of extruded copper tube. Since the fins are integral to the tube, maximum heat transfer is attained. Every Raypak Millivolt has the same robust design tube bundle that we use in our large gas commercial boilers. |
|
• Stainless Steel Tube Sheet
Stainless steel tube sheets are used on all Raypak Millivolt heaters that use the Polymer resin headers. This allows for a completely nonferrous waterway leaving your pool truly rust-free. |
|
• CPVC 2" Water Connections
Standard with every Raypak Millivolt is a set of 2" slip fit CPVC water connections to make your installation secure and effortless. |
|
• Condensation Protection
Standard on all Raypak Millivolt models is Raypak's Unitherm Governor, which helps reduce condensation from low inlet water temperatures. The Unitherm Governor automatically regulates the water flow to help keep the water temperature in the heat exchanger above 105°. Both water temperature and water flow rate are controlled to eliminate condensation, sooting, and scale buildup that can shorten heater life.
|
|
• High Flow Rates
No need to worry about large pumps or high flow systems. The Raypak Millivolt comes with an automatic bypass built into the header. You'll find that the Raypak Millivolt delivers the industry's lowest pressure drop and highest water flow rate - up to 125 gallons per minute - exceeding the maximum recommended for 2" plumbing systems. More hot water moves through faster and more efficiently. |
|
• Fuel Efficient
Efficient? You bet. Energy-smart Raypak heaters consistently achieve the highest efficiency ratings and the Raypak Millivolt is no exception. It exceeds all federal and state standards.
|
|
|
Combustion Chamber
• Burner Tray
Every Raypak Millivolt burner tray is built to last. From the stainless steel burners to the aluminized metal used in the heat sensitive areas. In the event that anything should happen to your burners they can be quickly and easily serviced. One more reason why the Raypak Millivolt is made to take the work load year after year.
|
|
• Fire Tile
A ceramic fiber combustion box keeps your Raypak Millivolt running efficiently and keeps the outside jacket cool. By using this space-age material the heater won't retain residual heat after it is turned off, allowing it to be installed without the use of costly metal heat sinks.
|
|
Quality
• ISO 9001
Raypak is proud to be a ISO 9001 registered manufacturing plant. One more reason why Raypak is number one in the heater industry today. |
|
• End-of-Line Test
Every Raypak gas pool heater is plumbed and test fired before it is put in the carton. This ensures that your heater will fire right out of the box and continue to give you years of trouble-free operation. |
|
• Quality Checkpoints
The Raypak assembly process includes 6 final assembly quality checkpoints that help to ensure that each and every Raypak Millivolt is built correctly, and built to last. |
|
• CSA Certified
All of Raypaks products are CSA certified. The Raypak Millivolt is tested by CSA to the ANSI Z21.56 standard. |
|
|
| |
| Base SKU:PR336AEN-N |
| In Stock:Yes |
Regular Price: $1,999.99
On Sale For: $1,758.62 |
|
| |
Quantity:
|
|
|
|