Digital Wireless Heat Siphon - the Future
DIGITAL FEATURES
ALL DIGITAL MODELS HAVE the HEAT SIPHON DIGITAL PLAYER CONTROLLER
BUILT IN offering many additional features and options, a sophisticated
problem detection system, a 4 digit LED display and 4 discrete LED
lights to provide constant MODE (POOL, SPA or AUTO-PIC) status and
feedback.
The DIGITAL DISPLAY - SHOWS WATER TEMPERATURE and SET-POINT and
ERROR CODES and ALERT MESSAGES while 4 STATUS LED’s show current
operation modes:
- Green LED for POOL blinks while heating and is solid on when the pool is at temperature.
- Yellow LED for SPA works the same.
- Red LED blinks for alert or error codes and stays on if SERVICE is required.
- Blue LED is on if the Player's built in PUMPJUMP
feature for off cycle heating is active or shows wireless communication
is occurring.
DUAL
THERMOSTAT for POOL SPA COMBOs - lets you set pool & spa
temperature separately and simply select either one by changing the
MODE.
AUTOMATION SYSTEM READY - Digital Player has an EC MODE (external
control) with screw down terminals built in to allow remote ON/OFF
switching via hard-wiring to all 3rd party pool/spa controllers.
WIRELESS READY - DIGITAL PLAYER CONTROL accepts the PLUG-IN DIGITAL
PASSPORT (ADD ON) which provides a wireless gateway to the HEAT SIPHON
DIGITAL FOOTBALL POOL SPA CONTROL SYSTEM.
Three Digital Modes with just 2 Buttons!
All Heat Siphon Digital models have three modes - POOL, SPA and Patent Pending AUTO-PIC®:
- POOL - Heats to the Pool set-point
- SPA - Heats to the Spa set-point
- AUTO-PIC® - Automatically Picks
AUTO-PIC® picks the right set-point (pool or spa) all by itself with
no wires or other controllers or any connections to anything.
You just turn your valves (manually or motorized) to circulate pool
or spa water through your Heat Siphon and AUTO-PIC® DOES THE REST.
HOW? - It "learns" the heat-up rates of the pool (slow) and spa (faster) and based on the rate it picks the proper set-point.
ANALOG FEATURES
ANALOG MODELS are LOWER COST & HAVE A SINGLE KNOB, simple 24
VOLT series control circuit and mechanical thermostat. Many of our
customers prefer the simple no nonsense design.
POOL SPA COMBO - Analog single thermostat requires manual setting to pool or spa set-point
AUTOMATION SYSTEM HOOKUP - Simple series analog 24 volt control
circuit allows easy hard-wire hookup to an external controller. Just
turn the thermostat up all the way to 10 and let the controller turn it
on/off.
UPGRADE PATH - DIGITAL PLAYER RETROFIT KIT as an add-on are available
to change your ANALOG Heat Siphon to DIGITAL if you later decide to go
wireless and will provide ALL PLAYER FEATURES to analog unit
